Usecase Examples
Following are three major usecase examples for continuous aggregation:
-
Real-time Analytics: A real-time analytics platform that continuously aggregates data from a stream of events, delivering immediate insights while optionally downsampling the data to a lower resolution. For instance, this system can compile data from a high-frequency stream of log events (e.g., occurring every millisecond) to provide up-to-the-minute insights such as the number of requests per minute, average response times, and error rates per minute.
-
Real-time Monitoring: A real-time monitoring system that continuously aggregates data from a stream of events and provides real-time alerts based on the aggregated data. For example, a system that aggregates data from a stream of sensor events and provides real-time alerts when the temperature exceeds a certain threshold.
-
Real-time Dashboard: A real-time dashboard that shows the number of requests per minute, the average response time, and the number of errors per minute. This dashboard can be used to monitor the health of the system and to detect any anomalies in the system.
In all these usecases, the continuous aggregation system continuously aggregates data from a stream of events and provides real-time insights and alerts based on the aggregated data. The system can also downsample the data to a lower resolution to reduce the amount of data stored and processed. This allows the system to provide real-time insights and alerts while keeping the data storage and processing costs low.
Real-time analytics example
See Overview for an example of real-time analytics. Which is to calculate the total number of logs, the minimum size, the maximum size, the average size, and the number of packets with the size greater than 550 for each status code in a 1-minute fixed window for access logs.
Another example of real-time analytics is to retrieve all distinct countries from the ngx_access_log table.
You can use the following query to group countries by time window:
/* input table */
CREATE TABLE ngx_access_log (
client STRING,
country STRING,
access_time TIMESTAMP TIME INDEX,
PRIMARY KEY(client)
);
/* sink table */
CREATE TABLE ngx_country (
country STRING,
time_window TIMESTAMP TIME INDEX,
update_at TIMESTAMP,
PRIMARY KEY(country)
);
/* create flow task to calculate the distinct country */
CREATE FLOW calc_ngx_country
SINK TO ngx_country
AS
SELECT
DISTINCT country,
date_bin(INTERVAL '1 hour', access_time) as time_window,
FROM ngx_access_log
GROUP BY
country,
time_window;
The above query puts the data from the ngx_access_log table into the ngx_country table.
It calculates the distinct country for each time window.
The date_bin function is used to group the data into one-hour intervals.
The ngx_country table will be continuously updated with the aggregated data,
providing real-time insights into the distinct countries that are accessing the system.
You can insert some data into the source table ngx_access_log:
INSERT INTO ngx_access_log VALUES
("client1", "US", "2022-01-01 01:00:00"),
("client2", "US", "2022-01-01 01:00:00"),
("client3", "UK", "2022-01-01 01:00:00"),
("client4", "UK", "2022-01-01 02:00:00"),
("client5", "CN", "2022-01-01 02:00:00"),
("client6", "CN", "2022-01-01 02:00:00"),
("client7", "JP", "2022-01-01 03:00:00"),
("client8", "JP", "2022-01-01 03:00:00"),
("client9", "KR", "2022-01-01 03:00:00"),
("client10", "KR", "2022-01-01 03:00:00");
Wait for one second for the Flow to write the result to the sink table and then query:
select * from ngx_country;
+---------+---------------------+----------------------------+
| country | time_window | update_at |
+---------+---------------------+----------------------------+
| CN | 2022-01-01 02:00:00 | 2024-10-22 08:17:47.906000 |
| JP | 2022-01-01 03:00:00 | 2024-10-22 08:17:47.906000 |
| KR | 2022-01-01 03:00:00 | 2024-10-22 08:17:47.906000 |
| UK | 2022-01-01 01:00:00 | 2024-10-22 08:17:47.906000 |
| UK | 2022-01-01 02:00:00 | 2024-10-22 08:17:47.906000 |
| US | 2022-01-01 01:00:00 | 2024-10-22 08:17:47.906000 |
+---------+---------------------+----------------------------+
Real-time monitoring example
Consider a usecase where you have a stream of sensor events from a network of temperature sensors that you want to monitor in real-time. The sensor events contain information such as the sensor ID, the temperature reading, the timestamp of the reading, and the location of the sensor. You want to continuously aggregate this data to provide real-time alerts when the temperature exceeds a certain threshold. Then the query for continuous aggregation would be:
/* create input table */
CREATE TABLE temp_sensor_data (
sensor_id INT,
loc STRING,
temperature DOUBLE,
ts TIMESTAMP TIME INDEX
);
/* create sink table */
CREATE TABLE temp_alerts (
sensor_id INT,
loc STRING,
max_temp DOUBLE,
time_window TIMESTAMP TIME INDEX,
update_at TIMESTAMP,
PRIMARY KEY(sensor_id, loc)
);
CREATE FLOW temp_monitoring
SINK TO temp_alerts
AS
SELECT
sensor_id,
loc,
max(temperature) as max_temp,
date_bin(INTERVAL '10 seconds', ts) as time_window,
FROM temp_sensor_data
GROUP BY
sensor_id,
loc,
time_window
HAVING max_temp > 100;
The above query continuously aggregates data from the temp_sensor_data table into the temp_alerts table.
It calculates the maximum temperature reading for each sensor and location,
filtering out data where the maximum temperature exceeds 100 degrees.
The temp_alerts table will be continuously updated with the aggregated data,
providing real-time alerts (in the form of new rows in the temp_alerts table) when the temperature exceeds the threshold.
Now that we have created the flow task, we can insert some data into the source table temp_sensor_data:
INSERT INTO temp_sensor_data VALUES
(1, "room1", 98.5, "2022-01-01 00:00:00"),
(2, "room2", 99.5, "2022-01-01 00:00:01");
table should be empty now, but still wait at least one second for flow to update results to sink table:
SELECT * FROM temp_alerts;
Empty set (0.00 sec)
Now insert some data that will trigger the alert:
INSERT INTO temp_sensor_data VALUES
(1, "room1", 101.5, "2022-01-01 00:00:02"),
(2, "room2", 102.5, "2022-01-01 00:00:03");
wait at least one second for flow to update results to sink table:
SELECT * FROM temp_alerts;
+-----------+-------+----------+---------------------+----------------------------+
| sensor_id | loc | max_temp | time_window | update_at |
+-----------+-------+----------+---------------------+----------------------------+
| 1 | room1 | 101.5 | 2022-01-01 00:00:00 | 2024-10-22 09:13:07.535000 |
| 2 | room2 | 102.5 | 2022-01-01 00:00:00 | 2024-10-22 09:13:07.535000 |
+-----------+-------+----------+---------------------+----------------------------+
Real-time dashboard
Consider a usecase in which you need a bar graph that show the distribution of packet sizes for each status code to monitor the health of the system. The query for continuous aggregation would be:
/* create input table */
CREATE TABLE ngx_access_log (
client STRING,
stat INT,
size INT,
access_time TIMESTAMP TIME INDEX
);
/* create sink table */
CREATE TABLE ngx_distribution (
stat INT,
bucket_size INT,
total_logs BIGINT,
time_window TIMESTAMP TIME INDEX,
update_at TIMESTAMP,
PRIMARY KEY(stat, bucket_size)
);
/* create flow task to calculate the distribution of packet sizes for each status code */
CREATE FLOW calc_ngx_distribution SINK TO ngx_distribution AS
SELECT
stat,
trunc(size, -1)::INT as bucket_size,
count(client) AS total_logs,
date_bin(INTERVAL '1 minutes', access_time) as time_window,
FROM
ngx_access_log
GROUP BY
stat,
time_window,
bucket_size;
The query aggregates data from the ngx_access_log table into the ngx_distribution table.
It computes the total number of logs for each status code and packet size bucket (bucket size of 10, as specified by trunc with a second argument of -1) within each time window.
The date_bin function groups the data into one-minute intervals.
Consequently, the ngx_distribution table is continuously updated, offering real-time insights into the distribution of packet sizes per status code.
Now that we have created the flow task, we can insert some data into the source table ngx_access_log:
INSERT INTO ngx_access_log VALUES
("cli1", 200, 100, "2022-01-01 00:00:00"),
("cli2", 200, 104, "2022-01-01 00:00:01"),
("cli3", 200, 120, "2022-01-01 00:00:02"),
("cli4", 200, 124, "2022-01-01 00:00:03"),
("cli5", 200, 140, "2022-01-01 00:00:04"),
("cli6", 404, 144, "2022-01-01 00:00:05"),
("cli7", 404, 160, "2022-01-01 00:00:06"),
("cli8", 404, 164, "2022-01-01 00:00:07"),
("cli9", 404, 180, "2022-01-01 00:00:08"),
("cli10", 404, 184, "2022-01-01 00:00:09");
wait at least one second for flow to update results to sink table:
SELECT * FROM ngx_distribution;
+------+-------------+------------+---------------------+----------------------------+
| stat | bucket_size | total_logs | time_window | update_at |
+------+-------------+------------+---------------------+----------------------------+
| 200 | 100 | 2 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
| 200 | 120 | 2 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
| 200 | 140 | 1 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
| 404 | 140 | 1 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
| 404 | 160 | 2 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
| 404 | 180 | 2 | 2022-01-01 00:00:00 | 2024-10-22 09:17:09.592000 |
+------+-------------+------------+---------------------+----------------------------+
Conclusion
Continuous aggregation is a powerful tool for real-time analytics, monitoring, and dashboarding. It allows you to continuously aggregate data from a stream of events and provide real-time insights and alerts based on the aggregated data. By downsampling the data to a lower resolution, you can reduce the amount of data stored and processed, making it easier to provide real-time insights and alerts while keeping the data storage and processing costs low. Continuous aggregation is a key component of any real-time data processing system and can be used in a wide range of usecases to provide real-time insights and alerts based on streaming data.